Tisch: TE-60700-BL
Mass Flow controlled (MFC) pm10 monitor in ambient air
Mass Flow Controlled PM10 System. Includes size selective inlet
(<10 micron cut size), anodized aluminum shelter, 8" x 10"
stainless steel filter holder with probe hole, blower motor assembly, continuous
flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow
probe, digital timer with digital elapsed time indicator, filter media
holder/filter paper cartridge. Complete system.
|
Specifications |
|
|
Inlet
collection efficiency: |
Meets
EPA’s PM-10 Code of Federal Regulations Appendix J to Part 50 |
|
Flow rate: |
40 cfm (adjustable) (.57 to
1.7m³) |
|
Filter media: |
Micro-Quartz filter media
8" x 10" for PM10 (TE-QMA) |
|
Flow control: |
Mass Flow Controller w/20-60
SCFM Air Flow Probe (TE-300-310) |
|
Motor blower: |
2-stage vacuum 0.6 HP
110v/60hz (TE-116311), 220v/50hz (TE-116312) |
|
Flow Indicator: |
Combination MFC with Digital
Timer (TE-300-312) |
|
Digital programmable timer |
Combination MFC with Digital
Timer (TE-300-312) |
|
Elapsed time indicator
device: |
Elapsed time indicator
(Digital) |
|
Sample Module: |
Particulate/vapor sampling
module with Tischaloy coating (TE-1002) |
|
Shipping Information: |
|
|
Size: |
22.5"
x 20" x 45.5" sampler carton, 32 x 32 x 25.5 inlet carton |
|
Weight: |
65
lbs. – sampler carton, 60 lbs. - inlet carton |
|
Assembled
Space Requirement: |
30"
round x 64" high |
|
Power
Requirement |
Single
phase with earth ground, 110v/60hz or 220v/50hz |
|
Motor
Specifications: |
110v/60hz – Part
#TE-116311, 2-stage vacuum 0.6 HP., double ball bearing thru-flow
discharge, 220v/50hz – Part #TE-116312, 2-stage vacuum 0.6 HP,
ball/sleeve bearing thru-flow discharge |
|
Altitude Application: |
to 10,000 feet above sea level |
|
Ambient Temperature Application: |
-30 to + 50ºC |
|
Relative Humidity Application: |
0 - 100% |
|
Sample Delay
Start Range: |
0 - 7 days |
|
Start up amps: |
12 amps |
|
Running amps: |
4 amps |
Other electrical characteristics available