Enerac 2000

Enerac 2000

Physical: 1. Case: 18" x 13" x 6" Aluminum case with lock. Weight: 15 lbs
2. Probe: 13"L x 3/8" OD. Inconel probe with aluminum handle and 10' hose std. (Other sizes optional).

Electrical: 1. Battery: 6V. rechargeable cell. 4 hour continuous operation on batteries. Quick 4 hour recharge.
2. AC: 120V. 60 Hz. std. (220V. 50 Hz. optional) 1A

Display 0.5" High by 25 Character single line LCD with backlight illumination and adjustable viewing angle.

Printer:
4" wide. 40 char. per line thermal printer with form feed and line feed buttons and end of paper override. Operates in any three modes:

1. Text Mode:25 line printout of current values of all measured parameters (time req 20 sec).

2. Plot Mode: Any one parameter vs. time plotted , 3 ordinate scales: full, half, quarter. Time scale: Selectable, 1 sec/dot-1 min/dot in 1 sec/dot intervals.

3. External Print Mode: Prints messages sent via RS-232 port or modem.

Storage: Internal: 99 individually selectable buffers hold one complete set of measurements each, including boiler identification number, in non volatile memory. Buffer contents can be sent to printer, RS-232 port or modem.

Micro-Computer: Accessory micro-computer can store up to 300 measurements in non volatile memory.

Communications
1.RS-232 Port. 1200 baud, 1 start bit, 8 bits, 1 stop bit, no parity.

2. Modem: Internal 1200 baud auto-answer modem connects to any modular phone line for remote cummunication.

(A 50 word command set sends instructions to the unit for remote control and troubleshooting)

Miscellaneous:
1. Fuels: 15 fuels, 3 in foreground, 12 in background standard. Custom fuels available on request.

2. CO alarm: Selectable 0-2000 PPM in 10 PPM steps.

3. Combustibles in ash: Presettable 0-100% in 5% steps.

4. Messages: One hundred diagnostic and help messages.

5. Calibration: Autozero on start up, software span calibration CO, NOX, SO2, combustibles and draft.

Back to Top

Physical:	1. Case: 18" x 13" x 6" Aluminum case with lock. Weight: 15 lbs 2. Probe: 13"L x 3/8" OD. Inconel probe with aluminum handle and 10' hose std. (Other sizes optional).
Electrical:	1. Battery: 6V. rechargeable cell. 4 hour continuous operation on batteries. Quick 4 hour recharge. 2. AC: 120V. 60 Hz. std. (220V. 50 Hz. optional) 1A
Display	0.5" High by 25 Character single line LCD with backlight illumination and adjustable viewing angle.
Printer:	4" wide. 40 char. per line thermal printer with form feed and line feed buttons and end of paper override. Operates in any three modes: 1. Text Mode:25 line printout of current values of all measured parameters (time req 20 sec). 2. Plot Mode: Any one parameter vs. time plotted , 3 ordinate scales: full, half, quarter. Time scale: Selectable, 1 sec/dot-1 min/dot in 1 sec/dot intervals. 3. External Print Mode: Prints messages sent via RS-232 port or modem.
Storage:	Internal: 99 individually selectable buffers hold one complete set of measurements each, including boiler identification number, in non volatile memory. Buffer contents can be sent to printer, RS-232 port or modem.
Micro-Computer:	Accessory micro-computer can store up to 300 measurements in non volatile memory.
Communications	1.RS-232 Port. 1200 baud, 1 start bit, 8 bits, 1 stop bit, no parity. 2. Modem: Internal 1200 baud auto-answer modem connects to any modular phone line for remote cummunication. (A 50 word command set sends instructions to the unit for remote control and troubleshooting)
Miscellaneous:	1. Fuels: 15 fuels, 3 in foreground, 12 in background standard. Custom fuels available on request. 2. CO alarm: Selectable 0-2000 PPM in 10 PPM steps. 3. Combustibles in ash: Presettable 0-100% in 5% steps. 4. Messages: One hundred diagnostic and help messages. 5. Calibration: Autozero on start up, software span calibration CO, NOX, SO2, combustibles and draft.